There are lot many things that can cause the water heater to develop problems. If you haven’t taken the right service package for the same, then it might even cause the water heater to explode, if you are not going to take the proper care of it for a long time. An exploding water heater can flood an entire hours within minutes.
Sediment is the main cause behind the explosion in most of the cases as it results in rust formation in the tank and this makes the walls weak. The tank is then not able to sustain the pressure of the heater water inside and it explodes. Many Edmonton hot water heater installation companies offer you sediment cleaning packages and you must make sure that you are getting it done on regular and timely basis.
You can also keep a vigilant eye on the water heater and if you notice anything suspicious, then you must call the expert right away. Leaking is also a sign of potential damage and must be checked on immediate basis. Leaking from the pipes that is supplying the hot water might be in indication of a leaking faucet, but it you see water droplets at the bottom of the tank, then you must get it checked ASAP.
Water quickly soaks into walls and insulation, and can destroy an entire room before it is noticed. If you have positioned the water heater at an area that is out of sight most of the time, then you need to be more careful. In addition to monthly checks, you should contact a professional to check your water heater every so often. Professionals flush the tank on regular basis and make sure they have cleaned the bottom of the tank, have checked the condition of the thermostat and they also take a look at the heating element.
Edmonton hot water heater installation is the best place to contact in case you have any problems with your water heater. Remember, it is always a good idea to take help of professionals on timely basis.
Image Credit: freedigitalphotos.net