1. Taking A Note At The Corrosion
Corrosion is the biggest enemy of any water heater and you need to make sure that you are keeping a right tab at the outer shell of the heater from time to time. If you see any signs of corrosion, then call the water heater expert right away. Take a close look at the pipes on the top of the water heater and look to see if any white powdery deposits are forming. If there are slight deposits, then you can brush them away using a soft wire brush and apply some oil to prevent the rust from spreading up. If neglected for a longer period of time, the rust might break down the strength and the pipe could burst at any time.
2. Check For The Leaks
Check for the leaks in the water heater from time to time. A leaking water heater can create quite a lot of problems if neglected in the longer run. The leak is the sign the tank is in distress, and one small leak can quickly turn into a large break at any moment. It is always a better idea to call the plumber when you notice any signs of leak at the water heater so that you are able to stop it at the moment it starts.
3. Take A Note At The Temperature Of The Water
Always pay a close attention to the temperature of the water that is coming out of the tank. If the water is not according to the temperature that you have set at the dial, then this might be an indication of a faulty heating element and you must make sure that you are getting it repaired. A faulty heating element might take more time to heat up the water and this will increase the energy consumption of the water heater. Ensure that you are calling the Edmonton hot water heaters specialists on first hand basis to get your heater checked to make certain it is running effectively.