If you hear some unusual rumbling noise while using your water heater, this may be due to the scale buildup inside the water heater tank or on its elements. The scale buildups are generally the deposits of calcium or magnesium. This buildup looks like white particles or like paper pieces. These deposits can harm the efficiency of your water heater. These scale deposits can be removed easily. Find out how you can prevent the scale buildup in future and remove the deposits that are already present.
Drain and Flush the Water Heater Tank
Flushing the water heater tanks help in removing the floating mineral particles and debris. Draining and flushing the tank is extremely easy and should be done twice a year. Shut off the cold water supply to the tank and turn off the electric supply or gas supply to the water heater. Now, connect a garden hose to the drain valve and drain the entire tank. Turn on the cold water supply and flush the tank for several minutes. Continue doing this till you obtain clear water from the tank. Disconnect the hose from the drain valve and turn on the gas or electric supply.
Maintain Correct Temperature
Heat is one of the main reasons of scale buildup. The hotter the water is, the more calcium, magnesium, and other minerals come out of the hard water and form sediment deposits in your hot water heater. So, if your thermostat is set at a higher value, it will worsen the issue. Hence, turn off the electric or gas supply, set the temperature dial, and maintain the temperature at 120°F to reduce the chances of scale buildup inside the tank.
Vinegar is a weak acid and is known as an easy cleaning chemical for the kitchen. Just like clearing kitchen stains, vinegar breaks the scale buildup in your water heater tank. All you have to do is drain the heater tank, close the drain valve, and pour gallons of cider vinegar. Let it sit inside the tank for at least 6 hours and then drain it from the drain valve. Now, flush the tank with cold water till clear water comes out. Once you are done, close the valve and restart the gas or electricity supply.
Install Water Softener
A water softener system removes the ions of minerals like calcium and magnesium from the water. Installing this system will prevent scale buildup not only in the hot water tank but also in other appliances and plumbing system. This way you can expect clear pipes, faucets, appliances, and water heater.
Get in touch with Hot Water Tanks Edmonton to get more information about scale buildup and get professional assistance to prevent it in the future. Our professional water heater installers can help you with all your water heater and plumbing issues.
A hot water heater is a basic necessity and you cannot afford this necessity to fail or become inefficient even for a day. There are several easy and inexpensive ways to increase your water heater's efficiency and life. All you need to do is follow these 7 maintenance tips to keep your gas water heater running perfectly for a longer period.
These maintenance tips are quite easy to perform, but if you are not comfortable doing them, call our Edmonton professional plumbers. Our experts at Hot Water Tanks Edmonton know how to increase the efficiency and life of any hot water heater, and they’re just a call away.
Water heater maintenance can be done easily, by anyone and everyone. A regular inspection and maintenance can help your water heater to survive for many years. Here are some ways how you can extend the life of your water heater.
Change the Anode
Check the anode rod made of magnesium or aluminum every 9-10 months. This rod is responsible for preventing the water tank from corroding. Replace this anode rod when you start seeing the internal core steel wire. If you have hard water supply in your area, check the rod more often.
Drain and Flush the Tank
Over time, debris, minerals, and other sediments develop on the bottom and walls of the tank. Every three months, drain the hot water tank. Flush the tank with gallons of water to remove the buildups. These sediment buildups can lead to internal corrosion and overheating of the tank.
Install Water Softener
If you obtain hard water that has a high concentration of minerals, install a water softener. This device will protect your water heater and other plumbing systems and fixtures from getting corroded. This will reduce the chances of sediment buildups too.
Check the TPR Valve
The temperature-pressure relief valve releases excess temperature and pressure inside the tank by releasing water from it. Excess pressure can result in pipe and tank ruptures or leaks. Check this valve every couple of years to ensure that it is working efficiently. Turn the key several times to see if it is moving smoothly. If not, fix it. Consider replacing it if the valve is too old.
Install Expansion Tank
An expansion tank holds expanded hot water that the water tank cannot hold. This way, expansion tank prevents the water heater from rupturing due to thermal expansion of water. Install it to lower down the chances of water heater damages.
Insulate the Tank
Insulate the water heater tank by wrapping tank blanket on the outer surface. This keeps the water hot for a longer time and reduces heating bills. This way, it reduces the frequent use of the tank, thus decreasing the damage.
Check the Venting System
For gas water heaters, check the venting system every three months. Check and make sure there is no damage or obstruction in the system, vent pipe, and air supply. Do the inspection every three months. Replace the damaged or corroded part of the system to facilitate easy flow of air and heat.
Carry Out an Annual Inspection
Call a professional plumber for a thorough annual water heater inspection. This will help them to identify the hidden defects that can lead to bigger, severe tank problems. Fix the minor defects before they get worse and affect the lifespan of your water heater.
By following these maintenance steps, you can extend the life of your water heater. But, even the best maintenance cannot prevent a water heater from failing. Every hot water tank will need repairs and replacement sooner or later. You can get in touch with our professional water heater installers whenever you face an issue related to your water heater.
A new water heater installation can be critical at times. An inexperienced installer can damage the water heater or its internal parts, or in the worst cases, can even set the system on fire. It is better to call a professional plumber than taking up the project in your own hands and increasing the chances of any kind of mishap. Here are 5 reasons why you should call a professional rather than installing the water heater yourself.
They Avoid Mishaps
Professionals have in-depth knowledge and hands-on experience in installing a new water heater. They take all the necessary precautions when installing. They make sure that all the water and electric supplies, and other connections are secured and done correctly. While installing, they maintain the temperature and pressure that is required inside the water heater tank. They eliminate all the possible mishaps that can take place during the installation process.
They are Updated
Professional water heater installers have a lot of knowledge and experience in this field. They are updated with the latest technologies, most efficient variants of water heaters, and various styles of water heaters available in the market. They are also aware of various codes and laws made by the local governing bodies that govern the water heater installation. These professionals make sure that they follow all the codes and make use of the latest technology to ensure that the installation is done correctly.
They Help You With the Best-Suited Options
Professional water heater installers are updated with various types of water heaters. They understand your needs and expectations from a water heater and suggest the best one for you. They also consider the water and power supply, water pressure, space available, and other factors in your home before suggesting the right water heater. They are experts on whom you can rely before selecting and installing the new water heater.
They Use Correct Tools
Installing a water heater may seem to be an easy task and can be done if one has detailed knowledge of the same. But, it requires correct tools and equipment. Professional installers have adequate and right tools to carry out the process easily. Homeowners generally do not have all the necessary equipment to carry out the installation process.
They Complete the Job Quickly
With the help of enough skills, tools and equipment, professional installers complete the new water heater installation in time without wasting time and resources. They ensure the best service at the first go.
Professional installers ensure careful handling and delivery of water heater and its correct installation. Our professional plumbers Edmonton are just one call away to ensure a safe and right installation. Right from carefully handling and delivering the water heater to a complete water heater maintenance, our plumbers are ready to provide any kind of assistance.