Whichever hot water tank system you have, there are easy ways to secure and maintain them for years. A regular hot water tank maintenance can eliminate the chances of tank breakdown and keep heater repairers away. Take a look at what you can do to maintain your hot water tank.
Drain and Flush the Hot Water Tank
In order to obtain clean water from the tank and protect the tank from serious issues, you must drain and flush the hot water tank annually. Draining the tank removes sediment buildups, rusted layers on metal components, and floating impurities in the water tank. Attach a garden hose to the drain valve and open it to drain the tank. Turn on the cold water supply and flush the tank for about 10-minutes.
Maintain the Right Temperature
Lowering the temperature setting and maintaining the right temperature can protect the tank from overheating and will also reduce the energy used to heat water. The ideal temperature to be maintained is between 48-55°C. Locate the temperature setting dial on the thermostat and adjust the dial.
Replace the Sacrificial Anode Rod
The magnesium or aluminum sacrificial anode rod prevents oxidization inside the tank. It prevents the tank from getting corroded. If the rod is entirely used up, it can fail to safeguard the tank and this can result in rusting of the tank. If rusting increases, the tank can develop holes and cracks and start leaking. In extreme cases, the tank can even burst.
Check the Components Regularly
For complete hot water tank maintenance, you must ensure that all components are efficient and in good working condition. Check the anode rod, temperature-pressure relief valve, heating elements, drain valve, thermostat, and all the other components every 5-6 months. Check if they function properly and smoothly, and replace them if needed.
Insulate the Tank
Insulating a hot water tank prevents overheating and bursting of the tank. It also saves the heating costs as insulating prevents the heat loss. Wrap an insulating jacket or a blanket around the tank without covering the drain valve and water inlets and outlets to maintain your tank for a longer period.
Reduce the Hot Water use whenever Possible
Using less hot water and using cold water whenever possible can put less strain on the hot water tank and extend the efficiency of the tank. You can wash clothes and utensils with cold water, use cold water for gardening and landscaping.
A regular hot water tank maintenance can easily extend the life of your heating system and reduce energy costs. If you need assistance in maintaining your tank or wish to conduct a professional inspection, you can consider our Edmonton hot water tanks professionals. We specialize in all kinds of installation, repair, and maintenance services of various hot water tanks.
Imagine standing under a shower with hot water hitting you from head to toe relaxing all your muscles. The hot water falling over you eases away all your stress leaving you comforted and relaxed. But you wouldn’t want all of this at the cost of high power bills. Have you ever thought that buying the right kind of water heater can reduce your annual electricity costs (provided you maintain them efficiently)? Most of you think of buying a new water heater only when your current one stops functioning. You then make an emergency purchase without doing adequate research. There are many types of water heaters in the market and each one comes with a set of unique features.
Types of Water Heaters
Criteria for Buying a New Water Heater:
At Hot water Tanks Edmonton, we provide comprehensive hot water tank installation, repair and replacement services. We can help you decide which water heater will be suitable for you. To know more about our services, get in touch with us today!
It’s not always wise to run away from technical nitty-gritties of your electrical appliances. In case of sudden breakdowns, you should be in a position to understand what has gone wrong and decide if you can handle the situation on your own or you need to call a professional to help. Your water heater is one such appliance which can occasionally be dysfunctional or completely stop functioning. In winters, water heaters are our saviors. We cannot imagine a day without adequate hot water supply on such days. You should, therefore, know when to replace your water heater and how it works.
If you use a gas based water heater then the water is heated with the help of a gas burner. But in electric water heaters, there is a metal heating element at the bottom and at the top of the water heater. The supply of cold water usually takes place through the bottom of the equipment. So as the water passes through the bottom, the heating element heats the water. The upper heating element contributes to the heating process only when there is a high demand for hot water.
The heating element in water heaters is usually made of a metal, which gets hot with electrical resistance. The mechanism is similar to the one used on induction cook tops. The problem occurs when these heating elements stop functioning properly. You are then left with the option of replacing the water heater or changing the heating element. This is decided by a professional water tank installer.
Hot water tanks Edmonton specializes in repairing and installing hot water tanks or water heaters. You can choose to contact us or continue reading if you are a do-it-yourself type of a person.
Replacing the water heater heating element involves three steps:
In case you feel confused about the process at any step then you can reach out to us. Our team of experts will help you replace the water heater element in no time.
Installing a new water heater might seem like an easy, do-it-yourself job. But most of us end up making common mistakes while installing a new water heater. Installing a new water heater is easy, if you have the necessary tools in place and are familiar with soldering copper. But for those of you who are new to this, it is advisable that you call a professional to get your water heater installed. There are many Edmonton hot water tank installers who can help you with your new water heater installation. But if you have decided to go ahead with the installation process on your own, then here are a few dos and don’ts which you should keep in mind.
DON’T - Clamp Exposed Wires
Among the list of don’ts, when installing a new water heater make sure to not clamp the exposed wires. While installing a water heater, there are many wires used which run through an electrical wire connector that has to be secured and clamped together. So make sure that you clamp only the sheathed and protected parts of the wire. Clamping the exposed part of the wire can be dangerous.
DO - Check for the Voltage
It is advisable to use a voltage tester before you start the installation process. Make sure you check the circuit breaker and outlets for electrical current. It’s good to have a voltage tester handy as it can be used for future electrical work as well.
DON’T - Fill the Tank till all the wiring is done
During the installation process, you should know when to fill the tank with water and when it has to be drained. Keep in mind if you wish to stay alive, don’t fill the tank till all the wiring work is done. Any kind of moisture while working with the wires can lead to electrocution. And don’t turn on any of the circuit breakers that power the hot water tank till it is filled up.
DO - Drain the Water Lines and Cut Off the Water Lines
As mentioned above, drain off all the water in the tank by attaching a garden hose to the drain valve. Then cut off the hot and cold water lines after you unscrew the vent pipe from the vent hood and move it to the side.
DO - Call a Professional When in Doubt
If while doing the installation process you get confused with the steps, then immediately call an Edmonton hot water tank installer. They will get your water heater installed in a day’s time. And it’s always better to be safe than sorry when a professional takes up the responsibility, you are no longer at a risk of getting injured or ruining your new water heater.
With Edmonton Hot Water Tanks, you can be assured that you get on-time service, up-front pricing, and emergency services 24/7. We’ll ensure that your work gets done correctly in the first time itself. Reach out to us to know more about installing your new water heater.
By receiving hot water during the chilly days is a boon to us. But did you know this hot water has a huge priced associated with it? A hot water tank can account for around 12% of a family's utility bills. A good news is that you can still save money with hot water tanks. Here are a few tips how it is possible.
Maintain the Ideal Temperature
Most hot water heaters are set at 140° by the manufacturers. But, it has been seen that 120° is also a comfortable temperature to maintain and use. Hence, always maintain the thermostat at 120° because for every 10º reduction in temperature, you can save about 3%–5% on your water heating costs.
Insulate the Tank
Your hot water tank can become hot over the years and result in a lot of heat and energy wastage. Insulate your hot water tank using an insulating blanket or jacket to prevent the heat and energy loss. Insulating the tank saves about 4%-9% of water heating bills.
Fix Hot Water Faucets and Fixtures
Check if the faucets and shower heads connected to the hot water tank are in good working condition. If you find leaks in or around the faucets, fixtures, or pipes, fix them at the earliest. Leaks can result in hot water wastage.
Flush the Tank Annually
Over the years, minerals and sediments can get deposited at the bottom of the tank. These sediments affect the heating ability of the tank. Flushing out sediments from hot water tanks at least once a year helps to keep the tank efficient. A well maintained and an efficient hot water tank survives for a longer period and effectively provides enough hot water.
Use less Hot Water
The simplest way to save money with hot water tanks is to use less hot water. Less hot water consumption means less need to use hot water tanks. Here is how you can use less water:
Take Showers instead of Baths
Taking long showers consume a lot more hot water than in bathtubs. Switch to short, nice, hot water bath using a tub.
Use Cold Water Whenever Possible
Some household tasks require hot water. Hence, you need to ensure you don’t turn on the water heater every time you need hot water. Turning on the heater time and again utilizes more power which ultimately increases your electricity bill. However, the key is to only use hot water when it’s extremely important.
Install Low-flow Faucets and Fixtures
Faucets, showerheads, toilets, etc. that exist since 1992, can use almost twice as much water as new ones. The newer, low-flow faucets and fixtures consume less water and still provide a comfortable water usage.
Wash full loads in Appliances
Avoid running a half-filled washing machine and dishwasher as washing fewer clothes or utensils still consume a lot of water. Always wash full loads in your washing machine or dishwasher so that more clothes and utensils are washed using hot water.
If you have a very old or inefficient hot water tank, you can consider replacing it with a new, Energy Star rated, energy efficient tank. Call our water heater experts Edmonton to know which hot water tank can suit your home’s needs.