Getting a new water heater is the only way out when your old water heater stops working completely. If you have recently purchased a new water heater, you are probably left with two water heaters, an old one and a new one. And disposing your old water heater can be quite a task. If you have purchased your new water heater from a professional water heater installer in Edmonton, then you need not worry about disposing your old water heater as they take care of everything. But if you are more of a do-it-yourself person then here are a few water heater disposal options,
There are many recycling companies which use metal and scrap it. Water heaters have a good percentage of metal content made of steel, copper or brass. Basically your useless old water heater could be gold for a recycling company. You can check with the Edmonton Reuse Center or any other recycling company. Some recycling companies even arrange for transport and pick up the water heater from your doorstep.
You can even contact your local garbage service who would pick up your old water heater from your doorstep. Some of the garbage service centers have a recycle program through which they can refurbish your heating unit.
Call Local Landfill
Another option is the local landfill service. You can contact them to find out if they can take your old water heater. They usually have a recycling program which takes care of such products. You can pay them a minimum fee and they will help you get rid of your old water heater.
Sometimes people end up getting a new water heater because they need more hot water than their old water heater can deliver. In that case if your water heater is in good working condition, you can consider donating it. There are many donation centers in Edmonton which would accept your old water heater if it is in good working condition.
Take Professional Advice
You can try contacting a professional hot water tank installer to help you get rid of your water heating unit. Most of them take responsibility of your old water heater when they install a new one.
At Hot Water Tank Edmonton, we install, repair and service all kinds of hot water tanks including water heaters. We also undertake the quick and easy disposal of your old water heater. Get in touch with our experts to know more about our services.
Most modern water heaters are built in a way to be energy efficient. But if your water heater is a slightly older model, then you might have to take certain steps to have an energy efficient water heater. The main benefit of having an energy efficient water heater is that you have reduced power and water bills. And this is your baby step towards energy conservation. So what are you waiting for?
Let’s take a look at some steps to make your water heater energy efficient.
Insulate Exposed Pipes
The first step towards making your water heater energy efficient is to insulate all the exposed pipes around it. The pipes right above your water heater are the usual culprits of energy loss. This is the place where the majority of the energy is lost. The reason behind this is that hot water automatically goes upwards just like hot air.
Get Rid Of Sediments In Your Water Heater
Over a period of time sediments get accumulated at the bottom of your water heater. This increases the time taken for your tank to heat the water. So your heater has to work for a longer period of time to raise the temperature of water. This reduces the efficiency of your water heater. You can avoid this by draining a gallon of hot water your water heater once in every six months.
Turn Down Your Tank’s Temperature To 120 Degrees
For every 10 degrees you turn down you end up saving 3-5% on your bill. Most water heater installers recommend that you turn down your hot water tank’s temperature to 120 degrees. This is the optimum temperature for your heater which is high enough for your needs. By doing this you also reduce mineral build-up in your tanks and pipes.
Insulate Your Water Heater
Considering the fact that temperatures in Edmonton can go really low at certain times during the year there are chances that your water heater can lose out on some energy due to the external weather. It is for this reason that you should insulate your water heater. Newer water heater models are usually insulated to protect any kind of heat loss while in use. But if you have an old model, then you might have to get an insulating blanket to reduce energy loss. You can save a considerable amount on your power bill by getting your water heater insulated.
If you need to know more making your water heater energy efficient, then you can get in touch with our experts at hot water tanks Edmonton. Our expertise lies in installing, repairing and maintaining hot water tanks.
Having hard water in your home has several disadvantages. Any plumbing surface or appliances that come in contact with hard water is at the risk of damages. One such appliance that experiences major damages due to hard water is the hot water tank. Take a look at various effects of hard water on hot water tanks.
Hard water in your home can lead to scale build-ups at the bottom of your hot water tank and even on the components of the hot water tank such as the heating element. The scale is a buildup of minerals, mostly magnesium and calcium. These build-ups lead to several other hot water tank problems.
Hot Water Tank Corrosion
The hotter the water in your tank is, the more the rate of scale build-ups. This because many chemical reactions take place with the help of heat. Hence, magnesium and magnesium in the scale reacts with the tank which is typically made of iron or steel and results in corrosion of the tank. A severely corroded tank also leads to leaks.
Constantly Clogged Pipes
The minerals can deposit on the inner surfaces of the pipes connected to the hot water tank. Eventually, the amount of this scale build-up increases and several layers are formed. The scale build-ups obstruct the flow of water from pipes and also result in clogs. This is one of the major reasons why you may obtain less water from hot water faucets.
Not Enough Hot Water
Scale build-ups on the heating element and tank can affect the heat transferring efficiency of the tank to water. Scales can keep the heat from getting to the water in your tank. This is one reason you don’t obtain enough hot water in your appliances and faucets. In order to obtain enough hot water, you will have to use the hot water tank for a longer period. This also increases the energy bills.
Foul Smelling Water
If you notice that water from your hot water tank smells foul or like rotten eggs, it is due to hard water supply. The minerals in the scale, mostly magnesium and calcium produce the foul smell that mixes with water inside the tank.
Strange Sounds From The Tank
You may hear strange rumbling or knocking sounds from the hot water tank while it is in use. This is generally because of scale build-ups inside the tank. When water flows through the tank, it experiences friction with the scale and produces these loud sounds.
The sacrificial anode rod depletes at a faster pace as a lot of oxidization occurs inside the tank. Also, you have to flush your hot water tank too often in order to maintain it. But eventually, replacing the anode rod and flushing the tank becomes less effective and you need repeated repairs. This way the life expectancy of the tank is reduced.
If you are facing any of these issues, you must call our Edmonton hot water tank installers immediately to avoid catastrophic situations.
Maintaining your water heater is the best way to extend its efficiency and prevent various serious issues. There are certain things that you can do on your own and maintain your heater rather than relying on an expert. Here are a few easy water heater maintenance tips that you can follow:
Keep the Surroundings Clean
It is important to keep the area around the water heater clean. Crowding the space around the heater can damage the objects placed around the tank. Be careful and avoid placing any inflammable items or chemicals around the heater or this can lead to accidents.
Check the Flame
If you have a gas water heater, it is important to check if the flame is blue and steady. Anything other than blue and steady flame can be due to a faulty burner or pilot and result in inefficient water heating and gas leakages.
Flush the Tank
Draining and flushing the storage type water heater tank annually or every 9-10 months help in removing the scale build-ups and sediment deposits inside the tank. Flushing the tank also helps in restoring the quality and temperature of water obtained from the tank.
Test the Valve
The temperature-pressure relief valve is responsible for removing excess pressure and temperature from the water heater. Lift the handle of the valve and check if there are any leaks. If yes, replace the valve.
Check the Anode Rod
Unscrew the anode rod, take it out, and check it. If the rod is less than 1/2 inch thick or is coated with a whitish layer of calcium and magnesium, replace it with a new anode rod. Depleting sacrificial anode rod can affect the efficiency of the heater and quality of water.
Insulate the Tank
Insulating the tank prevents heat loss from the tank and helps in improving the efficiency of the tank. Heat loss from the tank can take more time to heat water and lead to higher utility bills. Insulate the tank with an insulating jacket that is available in the market.
Install Extra Components
Installing a water and gas safety valve can shut down the water heater when it senses a problem. Installing a thermal expansion tank can prevent the tank from getting damaged due to excessive pressure.
Turn Off When Going Out
It is important to turn off the cold water and energy supply to the water heater. Water heaters may consume energy even when they are not in use. Turning off the supplies lowers the energy consumption and also the utility bills. This also reduces the risk of flooding and other water heater issues that can occur when you are away.
In case you face any difficulty in maintaining your water heater, you can seek professional help from our Edmonton water heater experts.
An efficient hot water tank is an absolute must in every Edmonton household. But this extremely important home appliance does not get the necessary attention until there’s a serious problem with it and you stop receiving hot water.
Over the years, your hot water tank may produce brownish or smelly water, make noises while heating water, get scalding hot, generate high energy bills, or simply stop producing enough hot water. In order to avoid such problems and dangerous situations and extending the life of your tank, you must follow several safety measures. Here are a few do’s and don’ts that you must keep in mind while maintaining your hot water tank and safeguarding it.