It is very annoying when you want to have a hot water bath and your water heater keeps turning off all on its own. Your gas water heater might go off for various reasons but one of the most common problems could be the pilot light going off. If the pilot light of your gas water heater does not stay lit, you need to fix it as soon as possible.
Here are some reasons why the pilot light in your gas water heater keeps going off:
One of the possible reasons why the pilot light in your gas water heater does not stay lit could be a dirty thermocouple. When you have a problem with your gas water heater not lighting, you need to check the pilot light. Then, conduct an inspection to see if the thermocouple is dirty. If you find out that the thermocouple is dirty, you will have to turn off the gas and let the thermocouple cool down. Once it is cool, you should clean it using a fine sandpaper. When you are done cleaning the thermocouple, you need to turn the gas back on and attempt to light the pilot.
At times, when the pilot light in your gas water heater does not stay lit, you have to check for a bent thermocouple. If the thermocouple is bent far from the pilot light it will prevent the pilot light from heating it. In this case, the thermocouple turns off the supply of gas and keeps the pilot light from lighting. In order to avoid your gas water heater from going out, you will have to bend the thermocouple in a way that it is closer to the pilot light.
Another possible reason for the pilot light not staying on could be a damaged thermocouple. In the case of a damaged thermocouple, you cannot conduct any repairs on your own. You will have to call professional plumbers to solve the problem or you will have to get the thermocouple replaced.
Dirty Pilot Tube
Sometimes, the pilot light in your gas water heater might not stay on due to a dirty pilot tube. You will have to turn off the gas and wait for the pilot tube to cool down before you start cleaning it. To clean the pilot tube, you will have to use a needle. With the help of a needle, you will be able to clear out all the blockages present in the pilot tube.
The problem of pilot light in the gas water heater going off is not very serious. You can fix this problem on your own easily but if you have never done any electrical work before, you should consider calling the professional plumbers in Edmonton.
Many people and even the professional plumbers in Edmonton at times are not able to figure out why the electric water heater keeps tripping the breaker. The red reset button is also known as the high limit. It is designed in a way to trip when the water in the tank becomes too hot. This way it will cut off power to the elements. The red reset button is only a manually reset thermostatic switch that is designed to shut off the power to the electric water heater once the water in the tank becomes hot. This red reset button has no other function.
What Causes The Electric Water Heater to Trip The Breaker?
Here are some different things that might be the reason why your electric water heater keeps tripping the breaker:
A Bad Thermostat
A bad thermostat will not shut off and will allow continuous heating of water even after the set temperature has been reached. The hot water tanks in Edmonton have two thermostats, an upper and lower under the access panels, as well as two elements. When the thermostat keeps sticking in the on position it will cause the element it serves to continue heating the water in the tank and so the red reset button trips in order to cut power to the electric water heater.
Loose Electrical Connection
An internal loose connection or a loose electrical connection at the place where the wires connect to the upper thermostat might generate heat caused by the high resistance that is inside the thermostat. This will cause the breaker to sense the heat of the loose connection rather than the temperature of the water tank causing the electric water heater trip.
Water Dripping on The Electrical Lines
Water dripping on the electrical lines could be a problem with the breaker or a problem with the unit’s thermostat. In this case, the thermostat needs to be replaced. Any leak that comes in contact with the electrical components can be dangerous and cause the breaker to flip. A leak can also be caused by a failing gasket. You should get the failing gasket repaired quickly by professional plumbers.
Troubleshooting Electric Water Heater That Keeps Tripping The Breaker
Repairing hot water tanks in Edmonton is relatively easy. You can do the task by yourself with basic electrical skills and knowledge. You also need to have the basic tools like a screwdriver and a basic multimeter. You will have to be careful as the electrical voltage is very high and it can cause severe injury and can also result in death.
The best way to deal with the problems associated with the hot water tanks in Edmonton is to call the professional plumbers in Edmonton. These professionals will be able to solve any problem with the electric water heater.
If the water in your tap is not as hot as it used to be before, your hot water tank might have the problem of a broken dip tube. A dip tube is a plastic pipe that goes through the cold water inlet to the bottom of the tank. The primary function of a dip tube is to deposit the cold water that enters the tank at the bottom so that it gets heated there. Once the water is heated, it travels to the top of the tank and exits the tank through the hot water outlet.
If there is a crack or a break in the dip tube, the cold water entering the tank gets mixed with the hot water on top. This leads to a loss of hot water. To solve this problem, you will have to repair or replace the dip tube. The professional plumbing service in Edmonton does not recommend repairing a dip tube as it will crack again soon. Replacing the dip tube will let you get the hot water experience again.
Here are the steps you will have to follow in order to replace water heater dip tube:
Before you take up any maintenance task on your water heater, you should turn off the power to it. If you have a gas water heater, you will have to locate the on/off button on your heater and turn it off. If your water heater is an electric one, you will have to go to your circuit breaker panel and turn off the water heater’s breaker.
Once you have turned off the power to your water heater, you will have to shut off the cold water supply. Generally, the cold water shut-off valve is located on top of the hot water tank. You will have to close this shut-off valve before continuing with the maintenance work.
Now you will have to drain a few gallons of water from your tank using the drain valve. This way you will be able to clear out the water remaining in the hot water pipe that is on the top level of your tank.
In order to remove the dip tube, you will have to cut the pipe between the water heater and the shut-off valve. A tubing cutter would be necessary to do this.
Remove the remaining part of the dip tube with the help of a pipe wrench. If the dip tube is in proper condition, your water heater might be having a different problem which the professional plumbers providing plumbing service in Edmonton will have to examine.
Now you will have to take the replacement dip tube and wrap all the threads with the help of a tape. Place the dip tube in place of the previous one.
Put the cold water supply back on and also turn the power to the water heater on.
If you follow all the steps mentioned above, you will be able to replace water heater dip tube on your own. However, if you have not done any of the electrical tasks before, you should not try this one. Calling the professionals who service the hot water tanks in Edmonton would be recommended for you.
Are you thinking of buying a new hot water tank for your home? Then, you need to know that there are different types of hot water tanks in Edmonton that you can choose from. The professional plumbers say that you do not have to buy the same hot water heater as your neighbors. Their hot water needs would be different than yours. So, it is very important that you choose a water heater which serves your purpose right.
Following are the different types of hot water tanks that you will find in Edmonton:
Conventional Storage Water Heater
The conventional storage water heater is one of the most commonly used hot water tank in Edmonton. It comes with an insulated storage tank that has the capacity of holding a large quantity of heated water. Liquid propane, natural gas, oil, or electricity could be the fuel for this type of water heaters. Whenever you need hot water, you will have an immediate and sufficient supply. The conventional storage water heaters are available in various sizes. You can select the one based on the requirements of your family.
Tankless Water Heaters
If you compare the tankless water heater with a conventional storage water heater, you will know that the tankless water heater promises energy cost savings. This is because the tankless water heaters heat water only when necessary. The tankless water heaters have low flow rate. They cannot accommodate more than one household use at a time. For example, you cannot have a hot water shower while you are running the dishwasher. Another disadvantage of tankless water heaters is that they come at a price that is double than the conventional storage water heaters.
Solar Water Heaters
The solar water heaters are powered by the sun. Thus, they have a free and unlimited source of energy. This type of water heaters contain two parts – an insulated storage tank and a solar collector. You can have the unit installed either on the roof or in the yard. There are two basic types of solar water heaters. The active solar water heaters distribute water through pumps, while the passive solar water heaters rely on the force of gravity.
Electric Heat Pump Water Heaters
The electric heat pump water heaters are powered by electricity alone. This type of water heaters work in order to intensify the heat that it draws from the air, transferring that heat to the quantity of water that is in the storage tank. An electric heat pump works more efficiently in hot climates as it works in concert with the environment.
These are the various types of hot water tanks in Edmonton. You can get the best water heater if you determine the needs of your family first. When you make up your mind on any particular type of water heater, you should also consider getting the right advice from professional plumbers to make sure that you are getting the best water heater for your home.
It is very important to set the temperature of your water heater right. Once you know what is the best temperature for your hot water tanks, you will be able to reduce the risk of scalding and prevent illnesses. The best temperature for hot water tanks will differ depending on what the hot water will be used for. The professional plumbers in Edmonton have listed a few things to keep in mind when adjusting the temperature of your hot water tanks in Edmonton:
There are two main and opposing risks that are associated with wrong hot water tank temperatures:
Best Temperature for Hot Water Tanks
Professional plumbers in Edmonton are of the opinion that the temperature of your hot water tanks should be adjusted according to the task for which the hot water is going to be used.
In order to prevent the risk of pathogens, it is important for you to set the temperature of hot water tanks properly. The temperatures of water that affect the survival of pathogens growing inside the stored water in the tanks are as follows:
If you set the temperature too high, it might scald the user. Young children and older people are at great risk as their skin is thinner as compared to the others. They will also not be able to move away quickly from the scalding water. The professional plumbers in Edmonton recommend the temperature to be set at 49o C.
The recent dishwasher models need minimum 49o C. Most of the new dishwasher models come with heaters and have the capability of heating the interiors. If you own an older dishwasher, you should check out the specifications for adjusting the best temperature for hot water tanks.
So, what is the best temperature for hot water tanks? The temperature that strikes the right balance between safety and comfort will be the right temperature for your hot water tanks. Get in touch with the professional plumbers in Edmonton if you do not know how to adjust the temperature of your hot water tank accurately.