Without a water heater, you aren’t going to have an enjoyable bath. So, what if you water heater was giving your problems? In this tutorial, we will walk through some of the most common ways to troubleshoot and repair electrical water heater problems.

Reset Circuit Breaker
If you don’t have hot water, reset the tripped reset circuit breaker or check if you have a blown switch. You should also confirm that the power is being provided to the electric water heating element thermostat.

• Test the upper heating element and replace it if required. If power is being provided to electric heating element thermostat, replace thermostat or heating element. Replacing the thermostat is the best solution for electrical water heater problems

​
Check The Water Capacity

• Make sure hot water demand does not exceed the capacity of the water heater. The water heater should have 75% of its capacity as hot water (e.g., a 40 gallon WH should be used for a demand of 30 gallons). In adequate hot water can be a primary reason why the water heater is not working. Check for crossed connection by turning off the water supply to the water heater. If the elements tested okay, check for the power supply at the upper electrical upper thermostat. If okay check lower thermostat. Replace if necessary.

Control Water Leaks

• A leaking pipe is an indication that water heater not working. Place a bucket under the overflow pipe. Open and flush the valve clear of debris. If a leak remains from the valve, replace the valve. Reduce thermostat setting to prevent tank overheating and opening relief valve. If the leak is coming from a pipe connection, such as water inlet or outlet or valve threaded connection, tighten the connection using an adjustable wrench to simply make the connection snug. Do not over-tighten! If the leak is coming from a corroded water heater storage tank then the water heater needs to be replaced.

Install Low Watt Density Elements

• If you hear a low whining noise from the heater, the first thing you should do is flush the water heater. Clean scale from water heater tank and elements. Install low-watt density heating elements which have larger surface areas transferring heat to water more efficiently, conducting less electrical wattage per square inch than a standard high-wattage element.

Whether you are looking to troubleshoot your electric water heater, Hot Water Tank Edmonton , has the best remedies when it comes to solving electrical water heater problems .

If you are going to invest in a good quality water heater then you could look forward to years of trouble free life. New age water heaters come with long warranties and even if something goes wrong with them, you can get them repaired free of cost. Hot water tanks Edmonton prices have shot up in the recent times and if you have more than one water heater at home, then you might be interested in taking good care of it as replacing them can be an expensive affair. Here are the 5 signs indicating that your water heater is in need of repairs.

• The first area that you need to keep a tab at, is to look for any water droplets below the water heater. This could be a sign of leakage and you must call the hot water tanks Edmonton prices experts as they offer you best repairs at competitive rates. Getting a water heater serviced at the right time is always going to cost you far less than an expensive replacement.
• The second sign of the water heater that you need to look out for is the corrosion. If you see the sides of the tank falling off or if there is too much of rust on the bottom and at the top of the tank, then it would be a right idea to get it scraped and checked by a professional.
• The third area that you must check from time to time is the pipes. There are two main pipes in a water heater; one is the supply pipe that takes the hot water to the supply line and one is the inlet pipe that takes the cold water to the water heater. You must ensure that these pipes are not leaking and it is highly recommended that you must use a high quality pipes for the same.
• The fourth sign is the sediment deposit inside the tank that can put a dent on heaters performance. If your heater is making cracking noises when you switch it on, then it is an indication that it is having too much of sediment deposit. It is highly recommended that you must get the tank flushed once in 5-6 months.
• Last but not the least; you must keep a tab on the water that is coming out of the water heater. If there is a rotten smell in the water, then it might be an indication of rust particles and other deposits. In such case, you need to get the heater checked by hot water tanks Edmonton expert.

You must give a good attention to the water heater that you have in your house to ensure that it performs flawlessly all year round. The best way to do the same is to get it maintained by a professional Edmonton hot water heater repair experts, as they have all the right knowledge and the experience on the same. The more careful you are with the maintenance part of the heater, the more you can be sure of getting a good life from it. In this article, we are going to share some of the points that indicate signs that your water heater might be in need of maintenance before you find yourself in an emergency situation. Here is a look at a few of the telltale signs of a failing water heater.

• Presence of Moisture and leakage

The most basic signs that you could look for in a faulty water heater are the leaks and presence of moisture at the tank. You must keep a vigilant eye on the surface of the water heater especially if it is more than 7-10 years old. If you have a storage tank type water heater that is at the basement of attic, then you need to be more careful with the maintenance part as it tends to get ignored most of the time. Your water heater may also leak due to lose connections or fittings. If you have too much of leakage around the tanks and at the joints, then it might be a good idea to get the heater checked by a professional Edmonton hot water heater repair expert.

• Age of the heater

Age of the heater matters a lot in the overall efficiency and the performance. So if you have a water heater that is more than 10-15 years old and has ever been maintained on regular basis, then it might not be a good idea to spend a lot on its maintenance. The best way to look at the time frame is to check the manufacturer’s sticker that has the serial number of the unit indicating the time frame of the same. So if your water heater is asking for repairs again and again, then it might be a good idea to get it replaced with a new unit.

• Rust

If there are signs of rust in the water, then you must immediately get the water heater checked by an Edmonton hot water heater repair expert. Using the water that has particles of rust in it can be dangerous for health and the heater must be replaced on immediate basis.

If you are looking for a new water heater for your home and thinking of replacing the ageing water heater that you already have, then you need to determine the condition of the old water heater before you go for the new model. Electric hot water heaters Edmonton might be the best choice to go as they are easy to maintain and are lot more efficient too. Here are the top signs that it may be time to replace your unit:

• Leaks

Leaks are the first and the foremost signs that you might need a new unit for your home. If you are noticing a puddle of water below the water heater everyday and if you water heater is already 10-12 years old, then it might be a good idea to replace the unit with a new one. Signs of impending leaks include developing corrosion, moisture, or mold around the base of the water heater.

• Age and Usage

Age and usage of the heater also plays a vital role in the overall efficiency of it. If you are using your water heater daily for more than 10 years, then it might be the best idea to replace it. Any expenses that you do on the maintenance after 10 years might be gone to waste as the heating unit remains old. And if you have no idea how old your hot water heater is, it’s probably time to replace your hot water heater.

• Water Temperature Issues

There are times when you don’t get the desired temperature of water from the unit despite setting the thermostat at the right setting. This might be an indication of a broken heating rod or a sediment build up. Heating element can be replaced but if your water heater is too old, it might not be a good idea to do the same.

• Visible Rust

Rust is a sign of an indication that the tank of the water heater is starting to corrode and you must never use the water that has rust particles in it. Once this process starts, it’s nearly impossible to reverse and getting a new electric hot water heaters Edmonton will be the best idea for the same.

• Too Costly Repairs

If you are spending a lot on the repairs of the water heater each month, then this is an indication that you need a new water heater. Spending a lot on an old water heater is always a bad idea as no matter how much you are going to spend, the heating unit will still be old.

Water heaters are one of the most important equipments of the house and you must ensure that they are running without any trouble. If you are facing any issues with the water heater, then the best thing to do is to get them checked by professionals. The best thing that you could do is to get the water heater maintained on a regular basis by contacting electric hot water heaters Edmonton experts. Most of the home owners don’t have any idea when it comes to the maintenance of the heater and they tend to neglect lot of points that turn into major repair problems. In this article, we are going to share few points that will aid you in the maintenance.

• Check The Pressure Release Valve

Pressure release valve is one of the important units in the water heater and if it is not functioning in a right way, then the heater might work under pressure and there will be chance of it getting burst. The valve isn’t terribly costly and can be replaced by a licensed plumber.

• Anode rod

If you are hearing lot of banging noises while the unit is operational and if it is taking more than required time to heat up the water, then you need to get the anode rode checked and replaced. Over the period of time, the rod develops sediment coating around the surface and this prevents it to come directly in contact with water. This also increases the overall energy consumption of the water heater.

• Get An Expansion Tank

Getting an expansion tank might be a very good idea and any good electric hot water heaters Edmonton expert might help you out with the same. The expansion tank will take excess water that cannot hold inside the water heater and this takes off the excess pressure if there is any. This not only keeps the heater safe from exploding, but it also keeps the pressure off the valves and pipes. Having an expansion tank can be very beneficial for those who want a lengthier life for their water heater.

• Flush The Tank

Last but not the least, flushing the tank is really important and it is highly recommended that you get it done every 6-8 months. The cleaner the tank is, the better it will be for the life of the water heater. Many new age water heaters may not require flushing and cleaning, those with an older tank should flush it out by an electric hot water heaters Edmonton expert. Flushing the tank prevents the formation of build-up and the heater will be more efficient and will consume lot less energy.

The best way to make sure that you are getting the most out of your water heater is to maintain it on regular basis. If you are going to do the same by hiring a professional electric hot water heaters Edmonton expert, then you can be sure that the life of your water heater will increase by a considerable margin. Most of the people lend no importance to the maintenance and it is when they realise the importance of it when the heater stops to work and they are left with cold supply of water on a chilly winter morning. Maintenance should be done once a year, especially before any problems occur with the unit and it is advisable that you get the part replaced that if giving you most of the problems before it turns in an expensive repair.

• Check The Pressure Release Valve

It is always a god idea to check the pressure release valve of the water heater unit from time to time. The valve is usually located at the top of most of the heaters and if you have trouble finding it, then it would be a good idea to call an electric hot water heaters Edmonton professional for the same.

• Consider Adding Another Anode Rod

If your heater s taking too much time to heat up the water, then the anode rod might be weak and it will be a good idea to replace it with a new one. A new rod will consume less energy as it will heat up the water in considerably less time.

• Get An Expansion Tank

It is a really good idea to get an expansion tank for the water heater if you are looking forward to a longer life from your water heater. The expansion tank takes up the excess water from the heater and reduces the chances of explosion and pressure build up inside the tank. Expansion tank is really important for people who have their storage tank heater at the basement of their house where they don’t check it on regular basis.

• Flush Or Clean The Tank

Hearing a lot of banging noses when the heater is operational? Well, these is an indication that there is too much calcium and sediment deposit inside the tank and get it flushed to save a lot on your energy bills. Flushing the tank will prevent build-up, and the tank will be more efficient and last longer if it's cleaned properly when it's necessary.