Installing a new water heater might seem like an easy, do-it-yourself job. But most of us end up making common mistakes while installing a new water heater. Installing a new water heater is easy, if you have the necessary tools in place and are familiar with soldering copper. But for those of you who are new to this, it is advisable that you call a professional to get your water heater installed. There are many Edmonton hot water tank installers who can help you with your new water heater installation. But if you have decided to go ahead with the installation process on your own, then here are a few dos and don’ts which you should keep in mind.
DON’T - Clamp Exposed Wires Among the list of don’ts, when installing a new water heater make sure to not clamp the exposed wires. While installing a water heater, there are many wires used which run through an electrical wire connector that has to be secured and clamped together. So make sure that you clamp only the sheathed and protected parts of the wire. Clamping the exposed part of the wire can be dangerous. DO - Check for the Voltage It is advisable to use a voltage tester before you start the installation process. Make sure you check the circuit breaker and outlets for electrical current. It’s good to have a voltage tester handy as it can be used for future electrical work as well. DON’T - Fill the Tank till all the wiring is done During the installation process, you should know when to fill the tank with water and when it has to be drained. Keep in mind if you wish to stay alive, don’t fill the tank till all the wiring work is done. Any kind of moisture while working with the wires can lead to electrocution. And don’t turn on any of the circuit breakers that power the hot water tank till it is filled up. DO - Drain the Water Lines and Cut Off the Water Lines As mentioned above, drain off all the water in the tank by attaching a garden hose to the drain valve. Then cut off the hot and cold water lines after you unscrew the vent pipe from the vent hood and move it to the side. DO - Call a Professional When in Doubt If while doing the installation process you get confused with the steps, then immediately call an Edmonton hot water tank installer. They will get your water heater installed in a day’s time. And it’s always better to be safe than sorry when a professional takes up the responsibility, you are no longer at a risk of getting injured or ruining your new water heater. With Edmonton Hot Water Tanks, you can be assured that you get on-time service, up-front pricing, and emergency services 24/7. We’ll ensure that your work gets done correctly in the first time itself. Reach out to us to know more about installing your new water heater.
0 Comments
A new water heater installation can be critical at times. An inexperienced installer can damage the water heater or its internal parts, or in the worst cases, can even set the system on fire. It is better to call a professional plumber than taking up the project in your own hands and increasing the chances of any kind of mishap. Here are 5 reasons why you should call a professional rather than installing the water heater yourself.
They Avoid Mishaps Professionals have in-depth knowledge and hands-on experience in installing a new water heater. They take all the necessary precautions when installing. They make sure that all the water and electric supplies, and other connections are secured and done correctly. While installing, they maintain the temperature and pressure that is required inside the water heater tank. They eliminate all the possible mishaps that can take place during the installation process. They are Updated Professional water heater installers have a lot of knowledge and experience in this field. They are updated with the latest technologies, most efficient variants of water heaters, and various styles of water heaters available in the market. They are also aware of various codes and laws made by the local governing bodies that govern the water heater installation. These professionals make sure that they follow all the codes and make use of the latest technology to ensure that the installation is done correctly. They Help You With the Best-Suited Options Professional water heater installers are updated with various types of water heaters. They understand your needs and expectations from a water heater and suggest the best one for you. They also consider the water and power supply, water pressure, space available, and other factors in your home before suggesting the right water heater. They are experts on whom you can rely before selecting and installing the new water heater. They Use Correct Tools Installing a water heater may seem to be an easy task and can be done if one has detailed knowledge of the same. But, it requires correct tools and equipment. Professional installers have adequate and right tools to carry out the process easily. Homeowners generally do not have all the necessary equipment to carry out the installation process. They Complete the Job Quickly With the help of enough skills, tools and equipment, professional installers complete the new water heater installation in time without wasting time and resources. They ensure the best service at the first go. Professional installers ensure careful handling and delivery of water heater and its correct installation. Our professional plumbers Edmonton are just one call away to ensure a safe and right installation. Right from carefully handling and delivering the water heater to a complete water heater maintenance, our plumbers are ready to provide any kind of assistance. |
Archives
November 2017
Categories
All
|