​Along with installing it correctly, a regular water heater maintenance is necessary to keep the water heater running efficiently. Flushing your water heater is the first and best way of maintaining it. Here are some common questions about flushing water heaters that arise in the minds of most homeowners.
​
Why Should You Flush Water Heater?
Draining and flushing heater tank on a regular basis prevent debris, sediments, and minerals from depositing on the walls and at the bottom of the water heater tank. These sediment buildups affect the quality of water and make it harmful to consume. You may obtain colored, smelly water from it because of the sediments. The water heater may heat up too much or take too long to reheat the water because of these mineral deposits. Flushing eliminates these problems and helps increase the efficiency and lifespan of the water heater. If you don’t drain and flush your water heater for years, your water heater will spring a leak. 

How Should Your Flush Water Heater?

• Turn off the cold water supply to the water heater.
• If you have a gas water heater, turn the temperature setting to ‘Pilot’. If you have an electric water heater, turn the electric supply off.
• Let water inside the tank cool down. This may take a couple of hours.
• Connect a garden hose to the drain valve located at the bottom of the water heater tank.
• Keep a big bucket handy to collect the drained water or extend the hose to a place where you can discharge water.
• Open the temperature-pressure relief (TPR) valve and open a hot water faucet (in the sink or tub) to release the vacuum from forming in the plumbing pipes connected to the water heater.
• Open the drain valve and let the water from the water heater tank drain. Drain the tank completely.
• Turn the cold water supply to the heater and flush the tank. Flush till you obtain clear water from the tank.
• Close the drain valve, detach the hose, and let the tank fill with cold water.
• Turn on your gas or electric water heater as you generally do.

How Often Should You Flush Water Heater?
The need for flushing your water heater depends on the water quality, your region, size of the water heater tank, and the number of members in your house. If you have 1-3 people in your family, flush your water heater every 12-15 months. If you have 5 or more family members, consider flushing the tank every 6-8 months. Also, the harder the water in your area, the more likely you’ll need a more frequent tank flush. 

If you haven't drained and flushed your tank it for years, flushing it now may cause problems you could never imagine of. Though flushing the water heater tank is an easy task, it can become dangerous to do it on your own after long intervals. Call our water heater experts at Hot Water Tanks Edmonton to do the work for you with their expertise.

Can you imagine a home without a hot water tank? A home with a hot water is one where you have a warm bath and enjoy the luxuries of life. Hot water heaters don’t last forever. Here are 5 reasons why your water heater will stop working.

High Water Pressure

Most Canadian homes don’t realize it, but water pressure can be a big reason for the death of not only your hot water tank, but also other appliances that utilize water. Water heaters work best at a PSI of 80. However, a pressure higher than 80 PSI can cause internal damage to the parts of the water heater. This can lead to leaks and rattling noises.

Sediment Buildup

One of the most common reasons that led to the death of hot water heaters is sediment buildup. Overtime, the bottom of your water tank has a buildup of minerals. This buildup eventually causes a problem when it insulates the anode from the rest of the heater and eventual leads to overheating.

Sediments tend to buildup much quicker with hard water as they are filled with minerals.

Improper Size

Buying the right hot water heater for your home is vital because if you don’t, your home won’t have sufficient hot water. At such moments, when the demand of the household exceeds the amount of hot water the heater can provide, your hot water heater will be worked harder than it was intended to.

This constant pressure will eventually degrade it.

Internal Rust

Anodes in the water heater protect it from rusting, however, once they get used up, the rest of the water heater is open to rusting. Ideally, the anodes should be replaced, but if they aren’t, parts of the water heater slowly start rusting.

Neglect

What’s the number one reason hot water heaters fail? It is neglect. Once a hot water is installed and set, it is never looked at again. This is called neglect. The simple act of checking a hot water heater once a year can reveal many problems that be dealt with before the water heater fails.

It is critical that you maintain your water heater if you don’t want it to fail.

For the best water heater maintenance, you should get your hot water heater checked by professionals. Hot water tanks Edmonton provide professionals who know what they’re doing and consider it a job done only when you say so.

Hot water heaters are a blessing on those freezing winter mornings. To keep them in excellent shape and avoid hot water heater problems, good water heater maintenance is a must. If not taken care of, these devices can be hazardous to you and your family. Protect yourself from unwanted accidents by following the water heater safety do’s and don’ts listed below.
​
Do’s
Ensure your gas water heater is installed in an area with adequate ventilation. Gas water heaters can leak carbon monoxide, which is odorless but can be toxic if inhaled. Get a professional to check your ventilation and for water heater maintenance to avoid leaks in future.

Set your water heater thermostat temperature to 120 degrees Celsius. Temperatures higher than 120 degrees Celsius can cause scalding, especially for young children.

Prevent the possibility of fire by storing flammable liquids such as paint cans, cleaning fluids, gas cans away from your gas hot water heater.

Sediment buildup in the hot water tank can cause corrosion and other water heater problems. Flush it once every three months to get rid of build up residue and prevent the need for hot water tank repair.

Get it serviced by a professional as regular water heater maintenance is essential for its smooth functioning and long life.

When going away for many days, set the water heater temperature to its lowest setting. This will save energy and avoid the risk of any hot water heater problems from occurring while you are away.

Check the safety valve at least once a year. If you don’t know how to, contact a water heater professional to detect early signs of hot water heater problems.


Don’ts
Don’t leave children unattended near a water heater

Don’t try to undertake hot water tank repair by yourself if you don’t know what you are doing. Always consult a professional.

Don’t ignore the signs that water heater maintenance is due. A minor problem today could cause a huge disaster tomorrow.

Don’t wait too long to call for hot water tank repairs, especially if you notice a leak.

Follow these tips for safe and efficient use of the water heater and to ensure it lasts for a long time before it is time to replace it.

Water heater maintenance must be done on regular basis to keep the water heater in best of condition. This means that you could expect more life from the heater and it will also help you save a lot on the energy bills. So what are the pints that must be kept in mind before you plan maintenance for the water heater? To start with, you need to ensure that you are getting it done by a professional tankless hot water Edmonton company. The storage tank water heater and the electric hot water heaters Edmonton both needs some or the other type of maintenance check from time to time. As you must have noticed, the water heaters are one of the most used equipments of the house and this is why they usually are the first plumbing appliance to break down, but when you can spot some signs of trouble you can help extend that life a while longer.

If you are going to compare the efficiency of a storage tank water heater with tankless hot water Edmonton, then they are less efficient and are prone to more break-ups. That is why it is highly recommended that you must go for a new model if you have a heater that is more than 10-12 years old. New age water heater also comes with longer warranties and most of the parts are covered under it. The areas that you need to check are rust at the tank, loud banging noises when the heater is operational and rust particles in the water. If you see the particles of rust, then it is highly recommend that you must get the tank cleaned on immediate basis. From time to time, you need to get the tank flushed properly to get rid of all the sediment and rust deposits. Never try to flush the tank by yourself and always call tankless hot water Edmonton for the job.

​Hot water heater can give you long life if you are going to maintain them on proper basis. Storage tank water heaters are not popular now and the best choice to go for are the tankless water heaters. These water heaters require lot less maintenance and you also don’t have to worry about the tank getting rusted, or too much of sediment deposit. As they don’t have to heat up the stored water, they also consume lot less energy. Many new age electric hot water heaters come with 10-15 years of warranty, so if something goes wrong with the heating element or the body, all you have to do, is to call in the technician, and the problem will be taken care of for free.

Water heaters are one of the most important equipments of the house and you must ensure that they are running without any trouble. If you are facing any issues with the water heater, then the best thing to do is to get them checked by professionals. The best thing that you could do is to get the water heater maintained on a regular basis by contacting electric hot water heaters Edmonton experts. Most of the home owners don’t have any idea when it comes to the maintenance of the heater and they tend to neglect lot of points that turn into major repair problems. In this article, we are going to share few points that will aid you in the maintenance.

• Check The Pressure Release Valve

Pressure release valve is one of the important units in the water heater and if it is not functioning in a right way, then the heater might work under pressure and there will be chance of it getting burst. The valve isn’t terribly costly and can be replaced by a licensed plumber.

• Anode rod

If you are hearing lot of banging noises while the unit is operational and if it is taking more than required time to heat up the water, then you need to get the anode rode checked and replaced. Over the period of time, the rod develops sediment coating around the surface and this prevents it to come directly in contact with water. This also increases the overall energy consumption of the water heater.

• Get An Expansion Tank

Getting an expansion tank might be a very good idea and any good electric hot water heaters Edmonton expert might help you out with the same. The expansion tank will take excess water that cannot hold inside the water heater and this takes off the excess pressure if there is any. This not only keeps the heater safe from exploding, but it also keeps the pressure off the valves and pipes. Having an expansion tank can be very beneficial for those who want a lengthier life for their water heater.

• Flush The Tank

Last but not the least, flushing the tank is really important and it is highly recommended that you get it done every 6-8 months. The cleaner the tank is, the better it will be for the life of the water heater. Many new age water heaters may not require flushing and cleaning, those with an older tank should flush it out by an electric hot water heaters Edmonton expert. Flushing the tank prevents the formation of build-up and the heater will be more efficient and will consume lot less energy.

There is no rocket science behind the notion that if you are going to maintain your water heater in a right way, then it is going to last you for many years. The best way to maintain the water heater is to get it serviced on regular basis by electric hot water heaters Edmonton experts. As they give you warranty and replace the parts with the genuine ones, you can be sure that you are helping to extend the life of your water heater by a huge margin. If you are going to make the list of the problems that are face by many families in regard to the water heater maintenance then one problem that tops out the list is the sediment build-up.

​Even the most efficient water heater is subject to daily damage from a dangerous occupational hazard is the sediment build-up. You can keep the sediment deposit in check by regularly getting the tank flushed by a professional how water heater services professionals. . Not only does a professional technician know how to work safely and knowledgeably of your water heater, but they also give you the right tips using which you can make sure that you are giving the right care to the unit.

​First thing that you need to be sure of is the right temperature of the thermostat unit. Too much temperature will result in unit taking too much energy to heat up the water and this will increase your monthly bills. Too little temperature will also have the same affect. The best method here is to strike a right balance of the setting the 135-140 degrees Fahrenheit should be a maximum. Keeping the temperature on the heater a bit on the lower side will save money in the long run. You also have to make sure that you are keeping a vigilant eye on the sediment build-up/ the best way to keep that in check is to get the tank flushed once in every six month. If you are not going to get it done on timely basis, then the coating around the element will cause it to work under load and this will result in premature failing of the unit.

The best way to avoid most of the problems that are associated with the water heater is to get it serviced at regular intervals by electric hot water heaters Edmonton experts. They also give you an option to select from the maintenance plans that they have on offer and this lets you choose the package that suits your needs and requirements.