Image Source URL: https://pixabay.com/
You often don’t realize that your water heater is in a bad condition. There are some signs with the help of which you can easily know that your water heater is about to fail. With these signs, you can avoid the disruption and damage of a failing water heater. Our professional plumbers who install, repair and replace hot water tanks in Edmonton have noted down a list of signs that indicate your water heater is about to fail.

Age of the water heater
Most of the residential hot water tanks in Edmonton are designed to last for around 10 years. You can know the age of your water heater by looking at the serial number on the top of the tank. Water heaters that are more than 10 years old should be considered for replacement. You can wait to replace your water heater until there is a leak but you might damage the things that are located close to the heater.

No hot water
One evident sign that lets you know your hot water tank is failing is, when you don’t get hot water. When you put the water heater on but you do not get hot water you know that there is a problem. No hot water could also mean that the pilot light has gone out in your gas water heater. To check what the exact problem is you will have to call professional plumbers.

Rusty water
This is a sign that your water heater is rusting from inside. The rust from inside the heater comes through the water in your taps. The problem of rust will happen when your water heater is at the last stage of its life. This should not be a problem with new water heaters. When you spot rusty water you should know that your water heater is wearing out and it needs to be replaced.

Rumbling noises
It is very important to pay close attention to the noises that your water heater makes. There will be normal heating sounds but loud pops and cracks might be a serious issue. Most of the noise issues are a result of sediment buildup inside the hot water tanks. When the debris come in contact with the heating element, it makes a lot of noise. Sometimes, flushing out the tank might solve the problem. If not, you might want to seek professional help.

Tank leaks
There is no easy fix for tank leaks. When you spot a leak, you will have to call professional plumbers immediately and get the water heater replaced. If the leaking water heater is not replaced in time, it might damage your home.

If you notice any of the above signs in your water heater, you should know that your water heater is about to fail. You need to call professional plumbers who are licensed to repair and replace hot water tanks in Edmonton and they will solve your problem.

You are hearing a lot of noises from hot water heater that has served your family loyally for the past four years. What do you think is wrong?
Here’s a list of common noises from hot water heater and their usual causes. One of these things could be wrong.

Popping, Banging, Crackling, Gurgling, Ringing, Rapid Surging Boiling Water, Rumbling
If you hear loud popping, cracking, or clanking noises from your hot water heater while operating it, it’s probably because mineral deposits have accumulated on the bottom of the water heater tank’s interior surface.

Hissing Noises
If your water heater is an electric unit, mineral deposits can cause a hissing noise when the heating electrodes are operating.

Humming
The element in an electric water heater is commonly placed vertical in relation to the tank. Water flowing around the element can cause vibrations in this situation, creating a humming noise. Tighten the element slightly to correct the problem.

Knocking or Hammering
A knocking sound in your walls is related to pipes heating internally, and is literally known as "water hammering." When water entering or leaving a tank is abruptly turned off, it can cause the pipes to shift, bang against studs or the interior of walls. This can be caused by a dishwasher or toilet bowl, or by a water pump without a holding tank. The noise is not dangerous to your water heater, but could lead to eventual wall damage if it is not corrected. Install a "water hammer arrestor" between the offending device and the water heater so you can prevent the noises from hot water heater.

Tank-less Water Heater Noise
Tank-less water heaters have their own distinct noises. If you hear a clicking noise, this is typically just the flow switch turning on and off to start and stop the flow of water and is completely normal. If it’s making a lot of noise when turned on, it may be because calcium deposits are being left behind due to hard water in your area. Installing a water softener system may be necessary. Others reasons for a noisy tank-less water heater model may be an issue with the burner, the fan may be dirty, or possibly a leak in the sealed combustion resulting in irregular gas combustion

Hearing noises from your hot water heater is a bit scary, especially if you’re looking at the possibility of the tank not working through a cold winter. Whatever the issue might be, we at Hot water tanks Edmonton, will be glad to help you out.

Who doesn’t dread the thought of taking a cold shower on a chilly winter morning? To prevent waking up to a water heater failure, watch out for signs that could mean your water heater is failing.

Rumbling noise from the water tank

If your water heater makes a rumbling, gurgling noise when turned on, it could be a sign of sediment deposition in your water tank. This sediment buildup can shorten the lifespan of your water heater. It can lead to an early failure by corroding the internal parts of the heater. Flush your water heater once every three months to drain the sediment from the water heater tank and prevent water heater problems.

Insufficient hot water
If the water coming from your water heater is not getting heated enough, it could be an indication of water heater problems and should be looked into. Mineral deposits in your water tank could act as insulators and prevent the water from getting sufficiently heated. This could cause the water heater to consume more energy and over a period of time could lead to water heater failure. Ask your local plumber in Edmonton to inspect your water heater tank for mineral deposits and take necessary action.

Leaky water heater
Leaks in the water heater could point to underlying internal problems. Internal water heater problems should be checked out immediately and repaired at the earliest to avoid premature water heater failure. If water leaks from your water heater tank and pools on the ground, it is a major sign that your water heater is close to failing. It indicates that corrosion caused in the water heater has built up to the extent that it can penetrate the unit and cause a leak.

Metallic taste or smell
If the water coming from your water heater has a peculiar metallic taste or smell, it could be rusted on the inside and must not be ignored. Rusty, red or brown water could also indicate that your water heater has rusted. If not fixed immediately, the heater may begin to leak soon.

But if you have galvanized piping, the rust could be coming from your pipes. Get in touch with a plumber in Edmonton to ascertain the root of the rust and get it fixed.

Temperature and Pressure Valve
The safety relief valve inside your water heater helps release excess pressure in the water heater when the control fails and the tank overheats. If the valve is capped off to prevent it from leaking, it could cause a pressure build-up inside the water tank and even cause an explosion. This is a safety hazard and must be taken care of immediately. Replace leaking temperature and pressure valves instead of getting them capped. The temperature and safety valves must be examined by a plumber in Edmonton at least once a year to ensure they are functioning efficiently.

In addition to these signs of a water heater failure, ask a professional to conduct regular maintenance checks to make sure your water heater performs well for years to come. A professional can also guide you on which problems can be taken care of by conducting minor repairs and which ones require the water heater to be replaced.