With many years of use, water heaters tend to show signs of wear and tear and need to be fixed. Before you call professional water tank experts for water heater repair services, here are a few things you can do yourself as quick fixes for your water heater.
Your water heater operates on electricity, and water and electricity are a fatal combination. To avoid risking an electrocution, turn off the electrical supply to your water heater before you start to work on your water heater repair.
You must also turn off the water supply to your water heater to avoid a major flood in your home.
A leaking water heater can cause mold formation, mildew, and even rotting of walls, floors and sub-floors. Leaks in the water heater must be tended to immediately. Water leaks could be typically caused by one or more of the following reasons.
1) Faulty temperature and pressure valve
Place a container under the overflow pipe and open the temperature and pressure valve. Flush it to get rid of debris. If the valve still continues to leak, you need to replace it.
Do not try to stop the leak by capping off the valve as the valve releases excess pressure, which builds up inside the water heater due to overheating. Capping off the valve hinders its ability to release pressure and could lead to an explosion.
2) High pressure of the temperature and pressure valve
If your water heater is set to a high temperature, the temperature and pressure valve will remain open almost continuously to relieve the excess pressure, thus causing a leakage. This can easily be fixed by lowering the temperature of the thermostat. A lower temperature ensures that the valve does not remain open and the leakage will stop.
3) Leaking inlet and outlet pipes
Check the connections of the inlet and outlet water pipes to and from the water heater. If these are loose, it could be causing a leak. Tighten them as needed or replace in case of rusty pipes with holes in them.
4) Leaking water heater tank
Check the interior and exterior surfaces of the water tank carefully for any signs of rust or small holes. These could be caused due to corrosion and cannot be repaired. If you spot even a single hole, you need to replace your water tank. Consult any of your local water tank experts for the best replacement for your old water heater tank.
Rumbling noise coming from water heater
If your water heater makes a rumbling noise when turned on, it could be an indication of sediment build-up in the water tank. Flush the water tank to get rid of the sediment build-up. Repeat once in every three months to keep the build-up as low as possible.
No hot water
For gas water heaters
Check if the pilot light is on, if it is not, turn it on carefully or ask your gas company to relight the pilot light.
Ensure the gas controls are turned on, to the highest levels and check if the water heater is properly connected to the gas control unit.
Inspect the thermocouple. If it is defective, get it replaced immediately.
For electric water heaters
Check the fuse box/circuit breaker. If the water heater repeatedly blows fuses, contact a professional electrician.
Press the reset button to check the thermostat and heating element. If found defective, replace the thermostat and heating element. If the problem still persists, get in touch with a professional providing water heater repair services.
Insufficiently heated water
In the case of both gas and electric water heaters, turning up the thermostat and insulating the pipes connected to the water heater should fix this problem. If water is still not hot enough, consult professional water tank experts for your water heater repair needs.
These quick fixes can save your water heater from an early replacement and save you loads of money. Be sure to consult professionals if you are not skilled to undertake repairs on your own and avoid risking your personal safety.
Water heaters take up about 14-18% of your home energy consumption and you can easily reduce the money you spend on them. Your water heater can be made more energy efficient by trying these easy, cost effective tips handpicked by water tank experts. Read on to see how you can get the best use of your water heater at a much lower cost.
1) Purchasing a new water heater
For those of you who have water heaters older than 10 years, it might be worth considering an upgrade. Newer energy efficient water heaters are widely available and perform better than their older counterparts. Look for the energy star ratings or ask your local water tank experts for their opinion before zeroing in on a model. It might seem like an expensive option but it will save you big bucks in the future. Look for plumbers in Edmonton who provide installation, repair and maintenance services to help you select the right water heater.
2) Install low-flow faucets and showerheads.
Low-flow faucets and showerheads consume less water and have a higher water pressure. Installing them will reduce the amount of hot water that you use, which means less energy consumed by your water heater to heat water. Not only will these save your money on electricity, but will also save your water bill from skyrocketing.
3) Go tankless!
Water heaters with tanks store the hot water which eventually cools down and needs to be reheated, if not used up immediately. Gas-fired and tankless water heaters are the best examples of energy efficient water heaters available today. Tank-less water heaters do not store the heated water and instead heat water on demand, thereby using less energy.
4) Set the temperature to 120 degree Celsius
Setting your thermostat temperature to 120 degree Celsius limits the energy usage and saves you precious money on electricity. Bonus: it also prevents scalding!
5) Fix leaks
If your water heater is leaking, get it repaired as soon as possible. Leaky water heaters waste gallons of heated water per day. Get in touch with plumbers in Edmonton to repair all water heater leaks and save your money from going down the drain, literally.
6) Take showers, not baths
Your bathtub consumes a lot of hot water and stacks up your energy bill. Showers use less hot water than bathtubs and put less pressure on your water heater. Taking showers instead of baths in the tub will save you energy, water, and time!
7) Insulate, insulate, insulate!
Hot water tank experts recommend insulating the first 6ft of your pipes coming from the water heater. This prevents loss of heat and keeps your hot water, hot. Spend some money on insulation and make your water heater energy efficient.
Consider installing heat traps in your water tank as they can prevent the heat loss of stored hot water in the tank. Consult your local plumbers in Edmonton to find out more about heat traps.
8) Drain your water heater tank
Once in every three months, drain a quart of water from your water heater tank. This water, if not drained, causes sediment build-up that corrodes your water heater tank. A corroded water heater tank cannot perform to its optimum efficiency and requires more energy to heat water. Prevent corrosion due to sediment build-up and your heater will last a long time while consuming less energy.
Follow these tips to get the most out of your water heater and save loads of money on bills. Plumbers in Edmonton can help you with more tips to improve water heater efficiency.