A typical “tank type” water heater is installed in most homes and with a little maintenance, provides trouble free operation for years. As the name suggests hot water tanks store the hot water until it is needed.
Like all other equipments, a hot water tank also has its own components. Its components are essential in the efficient functioning of the hot water tank. Here we are listing a few really important components of a hot water heater.
Water lines: Water line is either for cold water or hot water. Through this line, cold water enters the tank. The water line is controlled by a valve that helps to shut off the tank.
Dip tube: It is available inside the tank. Cold water goes here when entering the tank. The water will be heated here by a burner.
Sacrificial anode: This rod is made of metal. It is connected on the top and it extends inside the hot water tank. The key role of this anode is to attract rust to prevent corrosion inside the water heater.
This is an essential safety component of a water heater. Relief valve works along with the discharge pipe. Its key role is to release too much temperature and pressure inside the tank. Excess temperature and pressure should be released as soon as it reaches the limit of the set range. The Relief valve is connected on the cap of the tank. Usually, attached directly on the main cover.
Burner control mode: It works as a thermostat, as it lets you adjust the temperature. It helps in managing the blast-off of the light of the pilot. The burner is fabricated along with a pilot light. These two are really popular for an effective functioning of the hot water tank. In addition, these two help in using the energy wisely.
Drain valve: As the name suggests, a drain valve is used to empty the hot water tank. Usually, this valve is used when you need to clean the hot water tank.
Exhaust flue is mainly used for two purposes. First, it works as a heat exchanger and second it consumes burning gases that are created by the burner. As a heat exchanger, it assists in keeping the water of the storage tank, hot.
This information about hot water tank can assist you in using yours. These are the parts that you must be aware of, as they are crucial for the proper working of the hot water tank.
For more details about hot water tanks in Edmonton, get in contact with us today.
24 Hour Hot Water Tank Experts
The mere thought of your shower spewing out cold water on a chilly morning is horrible. But, this can happen to anyone, even you, if you won’t give much attention to your water tank and don’t get it serviced regularly. We repair, service and install Hot Water Tanks in Edmonton, Sherwood Park, St. Albert, Spruce Grove, Stony Plain and Leduc.
Emergency Plumbing and Hot Water Tanks:
Edmonton Central 587-405-3123
North Edmonton 587-906-3469
Stony Plain (780) 628-3119
St Albert (587) 805-1193
Spruce Grove 780-669-1076