Water heaters take up about 14-18% of your home energy consumption and you can easily reduce the money you spend on them. Your water heater can be made more energy efficient by trying these easy, cost effective tips handpicked by water tank experts. Read on to see how you can get the best use of your water heater at a much lower cost.
1) Purchasing a new water heater
For those of you who have water heaters older than 10 years, it might be worth considering an upgrade. Newer energy efficient water heaters are widely available and perform better than their older counterparts. Look for the energy star ratings or ask your local water tank experts for their opinion before zeroing in on a model. It might seem like an expensive option but it will save you big bucks in the future. Look for plumbers in Edmonton who provide installation, repair and maintenance services to help you select the right water heater.
2) Install low-flow faucets and showerheads.
Low-flow faucets and showerheads consume less water and have a higher water pressure. Installing them will reduce the amount of hot water that you use, which means less energy consumed by your water heater to heat water. Not only will these save your money on electricity, but will also save your water bill from skyrocketing.
3) Go tankless!
Water heaters with tanks store the hot water which eventually cools down and needs to be reheated, if not used up immediately. Gas-fired and tankless water heaters are the best examples of energy efficient water heaters available today. Tank-less water heaters do not store the heated water and instead heat water on demand, thereby using less energy.
4) Set the temperature to 120 degree Celsius
Setting your thermostat temperature to 120 degree Celsius limits the energy usage and saves you precious money on electricity. Bonus: it also prevents scalding!
5) Fix leaks
If your water heater is leaking, get it repaired as soon as possible. Leaky water heaters waste gallons of heated water per day. Get in touch with plumbers in Edmonton to repair all water heater leaks and save your money from going down the drain, literally.
6) Take showers, not baths
Your bathtub consumes a lot of hot water and stacks up your energy bill. Showers use less hot water than bathtubs and put less pressure on your water heater. Taking showers instead of baths in the tub will save you energy, water, and time!
7) Insulate, insulate, insulate!
Hot water tank experts recommend insulating the first 6ft of your pipes coming from the water heater. This prevents loss of heat and keeps your hot water, hot. Spend some money on insulation and make your water heater energy efficient.
Consider installing heat traps in your water tank as they can prevent the heat loss of stored hot water in the tank. Consult your local plumbers in Edmonton to find out more about heat traps.
8) Drain your water heater tank
Once in every three months, drain a quart of water from your water heater tank. This water, if not drained, causes sediment build-up that corrodes your water heater tank. A corroded water heater tank cannot perform to its optimum efficiency and requires more energy to heat water. Prevent corrosion due to sediment build-up and your heater will last a long time while consuming less energy.
Follow these tips to get the most out of your water heater and save loads of money on bills. Plumbers in Edmonton can help you with more tips to improve water heater efficiency.
24 Hour Hot Water Tank Experts
The mere thought of your shower spewing out cold water on a chilly morning is horrible. But, this can happen to anyone, even you, if you won’t give much attention to your water tank and don’t get it serviced regularly. We repair, service and install Hot Water Tanks in Edmonton, Sherwood Park, St. Albert, Spruce Grove, Stony Plain and Leduc.
Emergency Plumbing and Hot Water Tanks:
Edmonton Central 587-405-3123
North Edmonton 587-906-3469
Stony Plain (780) 628-3119
St Albert (587) 805-1193
Spruce Grove 780-669-1076